• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Cat flaps allow your pet to leave and come back as they please without you needing to let them in or out. They also help prevent your cat from toileting in the house.

Installing a cat flap into a door panel made of Upvc is much easier than in glass doors, however it will require some expertise and the right tools.

Take a measurement of the door

Installing a cat flap on a door can be tricky however, as long as you choose the right type of cat flap make sure you take your time and follow the instructions provided it should not prove to be too much trouble. We will be showing how to trace the shape, use the jigsaw to slice the area in the door and then finish off the job by fixing the cat flap to the door. This will ensure that the flap is in place and protects the doors from damage caused by rain and wind.

To determine the size of the cat flap you require, measure the width of your pet. This will let you select a flap that is big enough to allow your pet to walk into the house and exit without needing to open the door each time.

Once you have the measurements you can mark the location on the door where the template should be placed. usually, this is done using an X. However, some kits come with drawings that show where to drill, if you have one, then attach it to the door and draw a line around it. If your door has a moulding or sill on the bottom edge of it ensure that you have enough space because this will ensure your cat's safety and stop them from gaining access to your home.

Put on your eye protection and dust mask and using a jigsaw, begin cutting along the line that you have pencilled in, but don't press the blade too hard as this can cause it to cut more quickly than you would like it to. If you own an already-cut square, make use of it to verify that you're cutting properly and also to ensure that the hole is in a rectangle. Once you are satisfied with this you can begin to remove the remaining door material.

Draw a Line

The cat flap lets you to let your pet inside and outside without worrying about unwanted visitors or unwanted gifts. It also reduces drafts and helps keep the temperature inside your home steady. The installation of a cat flap your door might seem difficult for those who haven't attempted it before. Many people will call a professional carpenter or joiner to complete the job. It is an option, but you can do it yourself if your tools are in order and the steps are adhered to.

This is much simpler to do on a wooden door, but it is possible with uPVC. However it is important to be cautious not to damage the doors since this could invalidate your guarantee. The first step is to measure the door, ensuring that it can fit the new cat flap. This should be easy enough when you have the standard uPVC door, but you may need to take more care if using an alternative type of door since these are more difficult to cut than solid uPVC panels.

The next step is to determine the belly height of your cat. This is the height between the floor and the bottom of your cat's stomach. It is important to locate a space on the door that will allow your pet to pass through comfortably. Once you've figured out the measurements, you'll be required to mark the space with a spirit level and a pencil so you are sure that the hole will be suitable for your cat.

Once you've marked the area, it's time to cut the hole. It is crucial to take your time and use a jigsaw ensure that the cuts are clean and smooth not rough and uneven. This could cause damage to your door. Wear safety glasses and a dust mask when working with a jigsaw. Inhaling sawdust is hazardous for your health. After you've completed the cutting, you'll have to smooth the edges of the hole with sandpaper, so that the cat flap can be fitted easily into place.

Cut a hole

Getting a cat flap fitted to an existing door panel or double glazing sealed unit can be difficult. You might be tempted to tackle the job yourself, but unless have experience with DIY, it's likely to be best to have a professional to do the job for you. A shoddy job might not only look ugly, but also a security risk as well as allowing cold air to enter when the cat is outside and hot air to escape inside.

The first thing you need to do is mark the position of the hole in the door with pencil and an ax level. This will ensure that it is properly located and is flush with all the other parts of the door. You should make sure you have a piece of sandpaper at hand for any rough edges.

Wear any safety gear you need to work with the power tool. If you're worried about noise, you can purchase a cordless jigsaw which is quieter and easier.

It is important that you only remove the material required to fit the cat flap. It is necessary to leave a bit of material to cover the wall of the cat flap. However, removing too much can cause problems or even damage the door frame.

If the door is made of upvc and has a metal panel or frame, it may interfere with the microchip flap. In this situation, you will need to create an over-sized hole to ensure that the metal does not touch the walls of the flap.

If you're planning to install an animal flap to a upvc door or double glazed windows with a metal frame then you'll need to speak to a professional who can supply you with a new pane of glass with the hole for the cat flap in it. It is much less expensive to do this instead of trying to install the flap to an existing pane of glass that was not designed specifically for this purpose.

Install the Flap

Cat flaps let your pet leave and come as they please, giving them the freedom to lounge inside the house when they want to. However, if you own a uPVC door, it may be difficult to fit an animal flap, especially in the absence of a glass pane that can be cut to accommodate one. If you're looking to install a half-glazed uPVC replacement panel, it is possible to add the cat flap. It's not as simple as cutting a hole through the door though and there are some things you'll need to do first to ensure that it's safe.

A uPVC, GRP or composite door cat flap door panel usually has an extremely thin plastic outer skin that is bonded to a soft, insulating polystyrene core. The material is fairly fragile and care must be taken when cutting into it to avoid damaging. This type door has a template can be used to cut the hole.

Once you have marked the location of the hole in your door, now it's time to put in the cat flap step flap itself. You can purchase and install various models, from basic push-button operated ones to ones that are activated by microchips that allow access only to your pet. However, no matter what kind of cat flap you select, it is essential to ensure that your cat flap insulation is able to use the flap without getting stuck outside in the rain.

A circular Fitting Cat Flap In Upvc Door Panel is better than a square one, as circles can be cut more securely into glass. It's because square holes are more likely to crack the glass when they are drilled. It's also a safer option as you're not putting yourself at risk by having to drill into toughened glass that may break and hurt your pet or your family. This is particularly important if you have a young or elderly person in your home who may be injured by shards of glass.