• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Programming a Subaru Key Fob at Home

It is possible that you need the key fob to be programmed by an automotive locksmith or a Subaru dealer, depending on how old your Subaru is. This is accomplished by connecting a computer machine to your vehicle.

To program your Subaru to program, open the door on the driver's side by pressing the door button, and then close it. You will hear a chime from the instrument panel and the dome lights will flash.

Step 1: Find the Transmitter Circuit Board

There are several ways to program your key fob. First, you must know which kind of key fob you own. This can be done by looking at the form of the key fob or by listening to the buzz in your car.

Once you have the details you need, you can begin the process of programming your keyfob home. To accomplish this, you'll require a key made of steel and a screwdriver that has a flathead. Open the key fob by twisting. Then, push the metal key in and release the battery from the small tabs that hold it in place. Replace the battery with a fresh one and then put the key fob case back together.

Step 2: Unscrew the Key Fob Case

Change the battery is a smart idea as it can revive key fobs which aren't working any more. In some instances the buttons on the key fob can be damaged. If you notice that the metal contacts of the button are loosened, try soldering them in place again to make them function properly.

Before you begin the process, ensure your vehicle's doors are closed and that your ignition is turned off. Close the door on the driver's side and then press the button 10 times in rapid succession. After that, you'll hear the instrument panel chime and the dome lights will light up. This means you're ready move on.

Step 3. Insert the fob of the key into the ignition

Many websites will explain how to program your new or replacement subaru smart key replacement keyfob at home. However, most of them do not give specific instructions. A professional locksmith or auto dealer in Fort Bliss is the best alternative for reprogramming a digital car key.

Sit in the driver's seat of your Subaru with the engine turned off and the doors shut. Use the door button to unlock all the doors. Close and open the door to the driver's side two more times. Then, remove the key from the ignition switch (don't turn it) 10 times in 40 seconds. The system will chirp to confirm that the settings have changed.

Step 4 Step 4: Turn on the ignition

It is crucial to understand that this method of programming a key fob only is effective if you have a working key. If not you can find an auto-locksmith or dealer who will have to program the key for your Subaru Fort Bliss.

After the key is programmed, it will be in a position to start your vehicle within five seconds. To begin, ensure that all doors are closed and the engine is off. Then, sit in the driver's chair and unlock all doors using the door button control. Put the key in the ignition then turn it on to the off position (the electrical systems will come on, but the engine remains off), and then back to the off position ten times in quick succession.

Step 5 Step 5: Unlock the Driver's Door

subaru immobilizer key programming offers a wide range of high-end vehicles with key fobs, which can lock and unlock the doors, start the car, and defrost the windows. These devices can stop working.

To resolve this issue to resolve the issue, you should call an auto locksmith or dealer. This will solve the issue and ensure your vehicle is secure.

First, open and close the driver's door. Then, place the key in the ignition and switch it to the initial position. Then, reverse it to the off position. Do this as fast as you can ten times. After the tenth repetition, you will hear a chime.

Step 6: Press the Lock/Unlock button on the driver's Door

If you need to replace subaru key fob the battery on the Subaru key fob, the process is simple. The first step is to open the exterior fob casing. Make use of a flathead to pry the casing open inside and remove the old batteries.

After taking the battery out and replacing it with the new one. Close the case. Then, you can sit in the driver's seat and unlock all the doors with the door button control. Put the key in the ignition and turn the key so that the electrical system is turned on, but the engine remains off. Repeat this 10 times until you hear a sound on the instrument panel. This puts the system into programming mode.

Step 7 Step 7: Press the Lock/Unlock Button on the Passenger's Door

For certain owners, the irritating sound that is heard when locking and unlocking the subaru immobilizer key programming key fob from outside can be distracting. In certain situations you can turn off the sound by shutting and opening all doors by double-clicking on the lock button on the key fob.

Close all doors, including the lid that holds the fuel, and turn off the ignition. For 10 seconds, press and hold the lock button on the key fob. The instrument panel emits a chime after this is done. The chirp indicates that the door and fuel-filler lid are locked. The setting can also be altered so that the doors and lids for the fuel-filler lock automatically without having to press a request switch.

Step 8: Enter your 8-digit Transmitter Number.

Keep the first 8-digits in your head. Now, sit in your driver's seat, shut all of the doors, and turn the ignition to the first position (towards on). After ten turns, your instrument panel should sound once.

Then, you need to open the key fob case and locate the circuit board of the transmitter inside. There should be one or two sets of numbers (8-digits) on the circuit board. Take note of the first sequence of numbers, and follow the directions in this guide to register the code in the system of your vehicle. This process may require visiting the dealer for older models.