• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Unstick a suzuki spare key Ignis Key

suzuki swift key programming's funky and affordable city suzuki car key gets a re-designed midlife refresh. It's not a hot hatch, however it does eat up roads in rural and urban areas with ease, and its nifty turning circle makes city driving easy.

The new model also comes with smart driver assistance and safety technology such as lane departure warning and a drowsiness alarm which is a welcome feature on long drives.

Steering Lock

The steering lock is an essential security feature to avoid your Ignis from being taken away while it's in drive. It's a vital safety measure however it can be a hassle when you have to go someplace and you're not able to unlock the wheel. There are a few basic actions you can take to solve the issue.

Verify first that the ignition switch is set to "on". If this is the case, try turning the key in the same direction you did prior to the time that the wheel became locked. It's tricky, but usually it's enough to unlock the wheels.

If the wheel does not unlock after spraying canned air into the ignition cylinder grease the cylinder. Be sure to put on eye protection before doing this to ensure that you do not get any canned air in your eyes! Liquid graphite can also be used to provide lubrication to the cylinder.

If none of these methods are working, you'll have to replace the ignition lock assembly. This part is readily available in any auto parts store. Make sure to purchase an exact replacement and compare it with your old one. Also, make sure to remove the cover over the ignition so that you can view and reach the assembly.

Worn

The steering lock can cause the ignition switch to be stuck. This is a safety feature that is designed to stop your Ignis from moving away while the engine is running. If this occurs it is possible to unbind the steering wheel by manipulating it.

Over time, your ignition key can start to wear out and become more difficult to turn. It's not the same as a faulty ignition switch, but it could occur. If this is the situation it is recommended to replace the ignition key.

You should also see if there is obstructions that are preventing your Ignis key from getting into the ignition cylinder. There could be dirt or debris which can become stuck inside the ignition cylinder and prevent it from turning.

You can also test a little lubricant to see whether it can help. You can find a variety of lubricants in your garage or at a local auto parts store.

Another option is to use the silicon "glow in the dark" key cover. These covers absorb light energy and release it into dark or hazy conditions. They also help to protect your fob or key from wear and tear. They are available for a variety of suzuki celerio key programming models and can be purchased online or at an Suzuki Sx4 Key Fob Programming dealership near you.

Bent

In time and over time, with repeated use, keys can become bent. This can cause the teeth on the key not to be in contact with the lock cylinder in the same manner and prevent the key from turning in the ignition. In this scenario you'll have to replace the key. If you have spare keys, it is recommended to get it duplicated and store it in a safe place.

Another reason is that the ignition cylinder itself may wear out. If the internal lock pins are stuck or jammed together, this can prevent a key from going completely into or out of the cylinder. This can be fixed by replacing the cylinder, however, it is recommended to replace the cylinder before the key becomes stuck in the ignition.

If your key from Ignis is still stuck after trying the simple fixes, it may be time to consider lubricating the cylinder. Graphite powder or liquid graphite could assist in allowing the lock pins to move more freely and unbind your key. You can find this in most auto parts stores. When applying the lubricant, ensure that your Ignis is in park and don't try to manhandle it to unbind it. This could cause more serious issues.

Broken

If you've tried all the simple things to make a key remove its stick but it's still unable to move, the last option is to apply oil to move it. You can buy some of this at your local auto parts store and apply it to the inside of the cylinder in the ignition lock with a cotton ball or rag. Try again. Move the key forwards and backwards gently to spread the oil. Try to massage it forward, but be careful not to press too hard as you may break it in the cylinder.

It is also possible that the internal circuitry of the key may become inactive over time. This isn't as frequent as it sounds, so you'll need to create a duplicate key.

The case of your suzuki spare key keyfob can also become damaged or worn. This is especially common especially if you're using an inexpensive replica key fob that has a rubber or plastic shell. The Key Crew may be able to migrate the internal circuitry from your old keyfob into the replacement case, based on the specifics of the situation. This will reduce the expense of purchasing a new keyfob. When we call to set up your service, we'll inform you know if this is viable alternative.